Do you know what to pay attention to when plastic injection molding operation? 

 First, production process adjustment: 

1. First, check whether the process parameters are the same as the actual models, materials and molds; 2. When the process parameters are input at the same time, the first beer begins to produce at a slightly reduced pressure speed, and then gradually adjust (according to the product quality ratio); 3. In the absence of process parameters, it is necessary to understand the mold structure, the amount of glue and other adjustments. It is strictly forbidden to adjust blindly, pay attention to the special mold will stick to the mold if the special mold is not glue enough, and the multi-glue line will advance glue; Second, operator production: 1. Check whether the machine safety adjustment is safe;

2. 2. Whether the operator is familiar with the quality standards of the production products before operation;

3. 3. The plastic injection molding factory explains that the processing method should be correct, such as: the water mouth must be cut flat or flat, and other edge places can not be cut or cut;

4. 4. Pay attention to shrinkage, color mixing, top height, lack of glue, material flower, etc., and be clear about the limit of receiving degree;

5. 5. Products with strict appearance requirements, such as mirrors, light buttons, smooth surfaces, etc. which do not spray oil and are assembled outside, must not have fingerprinting oil points. The workbench should be kept clean and not scratched or bruised.

6. 6. During production, the product should be comprehensively inspected every 30 minutes, and the sample and packaging instructions should be carefully inspected to ensure that the qualified rate of the products produced is 100%;

7. 7. At the same time, pay attention to whether the machine nozzle leaks glue, whether the hopper needs to add material, whether the mold has problems, and whether the production task is completed every hour; 8. Overview of the plastic injection molding plant, carefully check the quantity when a box is completed, correctly fill in the trademark paper, pay attention to whether it is pasted incorrectly, and put the goods in the specified area, neatly placed.  
   

8.